Fixed Input Push-pull Control Chip SCM1212A, Integrating Three Key Technologies

 Introduction of Fixed Input Push-pull Control Chip SCM1212A

MORNSUN's newest fixed input push-pull control chip SCM1212A integrates soft-start function, output short-circuits protection, and over-temperature protection to effectively improve product reliability. SCM1212A  (SOT23-5 package) is functionally the same as the SCM1201A (SOT23-6 package) except the package, so the chip meets the market's demand for different pin packages.

SCM1212A has geminate power MOS, and it can work normally at a low input voltage of 4.5V and will not be damaged under the impact of a high input voltage of 40V. The internal power MOS has a high symmetry driving, thereby reducing the degree of bias of the push-pull topology.

The detailed information for three key technologies

1, Soft-start Function. It avoids the damage caused by high current during start-up and ensures normal startup with full load under CC load mode.

2, Output short-circuit protection. This protection has a good consistency, and it is not affected by the parameter deviation during power processing, nor by the high and low-temperature test conditions.

3, Over-temperature protection. When it exceeds the specified temperature range, the chip automatically enters the sleep state, and it can resume automatically when the temperature drops to the set value again.

Application of Fixed Input Push-pull Control Chip SCM1212A

It can be widely used in isolated power supply, industrial process control, isolated communication power, medical equipment, telecommunications equipment, and other fields.

Feature of Fixed Input Push-pull Control Chip SCM1212A

4.5~8V input voltage range

Built-in geminate power MOS

High MOS symmetry driving

Built-in soft-start

Output short-circuit protection

Over-temperature protection

Operation junction temperature: -40~+125℃

Providing matched transformer ( recommend TTB05xx-1T series)

 

We are power supply factory,we produce signal conditioner module,welcome to order.



评论

发表评论

此博客中的热门博文

Current-mode PWM Controller Integrated Circuit SCM1733ASA with 75mW Standby Consumption And 650V Power MOS

图片
  Introduction of   current mode pwm controller  SCM1733ASA   In order to achieve wider application range and lower price requirements, MORNSUN launched a new current-mode PWM controller SCM1733ASA applied to small and medium-power flyback   AC/DC converter    with ultra-low standby consumption of ＜ 75mW, a maximum output power of 20W, built-in high-voltage MOS and better price-performance. It features low starting current and working currently to achieve reliable start-up and achieving low consumptions.   When the AC/DC integrated circuit (IC) is fully loaded, the PWM switching frequency is fixed; after the load is reduced, the green mode is entered, and the switching frequency will step down; during no-load and light load, it will switch the intermittent mode to reduce consumptions. Multiple control modes also can provide soft-start control that reduces MOS stress and frequency jitter control to obtain good EMI. The frequency of intermittent mode is higher than 22KHz without audio no
阅读全文

[New products] Ultra Wide Input Isolated & Regulated DC-DC Converter-UWD240512D-20W

图片
  UWD240512D-20W is a kind of wide input dc dc converter .These products are of 23.5W output power,ultra-wide range of voltageinput of 6-60VDC, isolation voltage of 1500VDC, input over-voltage, under-voltage protection, output short circuit, over-current, andover-voltage protection.   Applications of DC DC Converter UWD240512D-20W Dc DC Converter UWD240512D-20W products are widely used in fields such as industrial control, electric power, instruments;communication, and bus swipe system.   Features of DC DC Converter UWD240512D-20WUltra Wide input voltage range (10:1) High efficiency up to 85% No-load power consumption as low as 0.3W isolation voltage :1.5K VDCOperating temperature range: -40°C to +85C Input under-voltage, over-voltage protection, output short circuit, over-current, over-voltage protection   MORNSUN   is a professional power supply supplier , we provide power supply , ac to dc converter, low cost dc dc converter   and etc. Want to know more? Contact us now.
阅读全文

SOIC-16 package isolated CAN/485 transceiver (R5 Bus IC)

图片
  Based on the IC integration requirement, Mornsun switching power supply factory   launched its SOIC package isolated Bus transceiver products, also called R5 Bus IC, this May.   Advantages:   1 ） Integrated power solution with superior performance R5 bus IC integrates power supply and digital isolation in circuit design to achieve power supply isolation and signal isolation. Take TDA51SCANHC and TDA51S-41HC as examples: only 5V voltage input is requested, and up to 110 nodes of nanosecond CAN bus signal transmission can be easily achieved at 1M frequency.   2 ） High reliability design, withstand voltage up to 5000Vrms R5 bus ICs are designed according to industry standards, taking TDA51SCANHC and TDA51S-41HC as examples, the products meet the requirements of ISO11898-2 standard, meanwhile, based on the requirements of UL1577 standard, the isolation voltage is up to 5000Vrms and CMTI is up to 150kV/us. The product integrates a variety of protections such as short-circuit protection, o
阅读全文