15-45W open-frame multi-output AC-DC power supply-- LOxx-10A/C/D series

 Introdution：

 

Since the launch of the high power density, economical open-frame single-output AC/DC converter LOxx-10Bxx series in 2019, MORNSUN continues to extend its multiple-output products. The new 15W LO15-10A/Dxx series was released this July, and the power of this series covers 15W, 30W, 45W.

 

Based on technical and technological innovation, the LO15 products have better performance and smaller size, saving layout space and cost for the users.

 

LO open-frame multi-output series:

LO15-10Axx series provides non-isolated dual-output of +/12V, +/-15V

LO15-10Dxx series provides isolated dual-output of +5/+5V, +5/+12V

LO30xx-10A series provides non-isolated dual-output of outputs of +/12V, +/-15V

LO30xx-10D series provides isolated dual-output of +5/+5V, +5/+12V, +5/+24V

LO45xx-10C series provides triple-output of +5/+12V/-5V, +5/+12V/-12V, +5/+15V/-15V

 

1）Compact size

Multi-output products can effectively save layout space and improve the flexible design

LO15-10A/D series：63.5*45.7*21 mm

LO30-10A/D series：76.2*50.8*28 mm

LO45-10C series：102*51*27.5 mm

 

2）Operating temperature range：

-25℃ to +70℃

No derating at full load: -10℃ to 50℃

 

3）High reliability

Comply with CE/CB/UL62368, with output short circuit, over-current, over-voltage protections

 

4）EMC performance

EMI meets CISPR32 / EN55032 CLASS B

 

Application:

 

It can be widely used in communication, industrial, commercial, and civil applications.

 

Features

 

Universal input voltage: 85-264 VAC and 100 - 370VDC

Operating temperature range: -25℃ to +70℃

Output short circuit, over-current, over-voltage protections

High reliability, regulated output, low output ripple noise

EMI performance meets CISPR32 / EN55032 CLASS B

Designed to meet UL/EN/IEC62368, IEC/EN60335 standards

We have a huge power supply factory, if you want to know more details of dc power supply factory or buy power supply, please contact us.

 


评论

发表评论

此博客中的热门博文

MORNSUN Automotive Compact Size High Isolation Transformer -TSHT5.8-01

图片
  MORNSUN launched a totally new product - automotive compact size high isolation transformer TSHT5.8-01. This new TSHT5.8-01 transformer not only has a high isolation voltage 3000VDC, features compact size and cost effective, but also meets AEC-Q200 standard.   This new transformer can be used with MORNSUN fixed input push-pull controller IC SCM1201  to achieve a 5 VDC input, 5VDC output, 1W rated power isolated DC/DC converter which is usually used to power and isolate the data interface such as RS232, RS485, CAN bus.   Application: Widely used in pure digital circuit, analog acquisition circuit, data exchange circuit.  Typical circuit block diagram as below, Features: > Meets AEC-Q200 standard that required by passive components automotive quality certification > Compact SMD package > Isolation voltage: 3000VDC > Operating temperature range: -40℃ to +125℃   MORNSUN as one of the most professional dc dc converter suppliers , we ...
阅读全文

Current-mode PWM Controller Integrated Circuit SCM1733ASA with 75mW Standby Consumption And 650V Power MOS

图片
  Introduction of   current mode pwm controller  SCM1733ASA   In order to achieve wider application range and lower price requirements, MORNSUN launched a new current-mode PWM controller SCM1733ASA applied to small and medium-power flyback   AC/DC converter    with ultra-low standby consumption of ＜ 75mW, a maximum output power of 20W, built-in high-voltage MOS and better price-performance. It features low starting current and working currently to achieve reliable start-up and achieving low consumptions.   When the AC/DC integrated circuit (IC) is fully loaded, the PWM switching frequency is fixed; after the load is reduced, the green mode is entered, and the switching frequency will step down; during no-load and light load, it will switch the intermittent mode to reduce consumptions. Multiple control modes also can provide soft-start control that reduces MOS stress and frequency jitter control to obtain good EMI. The frequency of intermittent mod...
阅读全文

Isolation or Non-isolation: How to Choose the Right Power Supply?

图片
  An important point to consider when choosing a power module is whether to use an isolated or non-isolated power solution. Before proceeding with the discussion, let us first understand the concept of isolated power supply and the main characteristics of isolated and non-isolated power.   What is the isolated power supply?  The isolated power supply is defined conceptually as the conversion of the voltage through a transformer to realize the isolation between input and output.     Then, what are the isolation features? For example, safety isolation, common-mode noise isolation, ground loop elimination, or for occasions with floating ground requirements, are its key features.   In addition to isolation, voltage conversion is also one of the important characteristics of power supply, including AC to DC, DC to AC, conversion between high and low voltage, and so on. What is more, with some peripheral devices, it can also stabilize the voltage, so as to protect...
阅读全文