±4kV High Surge Protection Isolated CAN Transceiver Module TD5(3)01DCANHE Series



MORNSUN recently launched the new isolated CAN transceiver TD5(3)01DCANHE with excellent EMC performance. The new series has two optional voltages of 3.3V and 5V, and are designed to withstand high voltage transients of up to 15 kV IEC ESD (air discharge), 8 kV IEC ESD (contact discharge), and 4 kV surge. Due to its outstanding EMC performance, the new series not only has low electromagnetic radiation and high resistance to electromagnetic interference, but also can run stably in a strong interference environment.

The TD5(3)01DCANHE series adopts IC integrated technology which greatly improve EMC performance and keep DIP8 package. Besides, with integrated power supply, CAN bus isolation and ESD protection in one module, they can bus surge protection in the applications of power grid, industrial control, transportation (rail, automotive) and instrumentation, etc.

For more details, please refer to the datasheet or consult our sales.



Applications:

Widely used in the applications of power grid, industrial control, transportation (rail, automotive) and instrumentation, etc.



FEATURES:

▶ Isolation: Two- port isolation 2500 VDC (input and output are mutually isolated)

▶ Baud rate up to 1Mbps

▶ Operating temperature range:-40℃ to +85℃

▶ Connect up to 110 nodes on one bus

▶ ESD protection: Contact ±8kV/Air±15kV

▶ Surge protection: ±4kV

▶ Meets EN62368 standards（Pending）



Please refer to the technical manual for specific product parameters：

·

TD5(3)01DCANHE

·


Series

Integrated Power

Transmission Rate
(bps)

Vin
(VDC)

Nodes Number

Isolation

Package

Features

Footprint & 3D

Certification

Datasheet

Sample

Buy





TD301DCANHE

√

20k~1M

3.3

110

2500VDC

DIP8

Surge protected












TD501DCANHE

√

20k~1M

5

110

2500VDC

DIP8

Surge protected















Series





TD301DCANHE




MORNSUN is a professional dc dc converter suppliers, we provide switch mode power supply china, transceiver module and etc. Want to know more? Please contact us.






评论

发表评论

此博客中的热门博文

Current-mode PWM Controller Integrated Circuit SCM1733ASA with 75mW Standby Consumption And 650V Power MOS

图片
  Introduction of   current mode pwm controller  SCM1733ASA   In order to achieve wider application range and lower price requirements, MORNSUN launched a new current-mode PWM controller SCM1733ASA applied to small and medium-power flyback   AC/DC converter    with ultra-low standby consumption of ＜ 75mW, a maximum output power of 20W, built-in high-voltage MOS and better price-performance. It features low starting current and working currently to achieve reliable start-up and achieving low consumptions.   When the AC/DC integrated circuit (IC) is fully loaded, the PWM switching frequency is fixed; after the load is reduced, the green mode is entered, and the switching frequency will step down; during no-load and light load, it will switch the intermittent mode to reduce consumptions. Multiple control modes also can provide soft-start control that reduces MOS stress and frequency jitter control to obtain good EMI. The frequency of intermittent mode is higher than 22KHz without audio no
阅读全文

[New products] Ultra Wide Input Isolated & Regulated DC-DC Converter-UWD240512D-20W

图片
  UWD240512D-20W is a kind of wide input dc dc converter .These products are of 23.5W output power,ultra-wide range of voltageinput of 6-60VDC, isolation voltage of 1500VDC, input over-voltage, under-voltage protection, output short circuit, over-current, andover-voltage protection.   Applications of DC DC Converter UWD240512D-20W Dc DC Converter UWD240512D-20W products are widely used in fields such as industrial control, electric power, instruments;communication, and bus swipe system.   Features of DC DC Converter UWD240512D-20WUltra Wide input voltage range (10:1) High efficiency up to 85% No-load power consumption as low as 0.3W isolation voltage :1.5K VDCOperating temperature range: -40°C to +85C Input under-voltage, over-voltage protection, output short circuit, over-current, over-voltage protection   MORNSUN   is a professional power supply supplier , we provide power supply , ac to dc converter, low cost dc dc converter   and etc. Want to know more? Contact us now.
阅读全文

SOIC-16 package isolated CAN/485 transceiver (R5 Bus IC)

图片
  Based on the IC integration requirement, Mornsun switching power supply factory   launched its SOIC package isolated Bus transceiver products, also called R5 Bus IC, this May.   Advantages:   1 ） Integrated power solution with superior performance R5 bus IC integrates power supply and digital isolation in circuit design to achieve power supply isolation and signal isolation. Take TDA51SCANHC and TDA51S-41HC as examples: only 5V voltage input is requested, and up to 110 nodes of nanosecond CAN bus signal transmission can be easily achieved at 1M frequency.   2 ） High reliability design, withstand voltage up to 5000Vrms R5 bus ICs are designed according to industry standards, taking TDA51SCANHC and TDA51S-41HC as examples, the products meet the requirements of ISO11898-2 standard, meanwhile, based on the requirements of UL1577 standard, the isolation voltage is up to 5000Vrms and CMTI is up to 150kV/us. The product integrates a variety of protections such as short-circuit protection, o
阅读全文