0.1-60W High-Precision AC/DC Power Supply control ICs

  MORNSUN recently launched new control ICs of AC/high precision dc power supply, which power range is from 0.1W to 40W, the series provides high performance, output precision, advanced dynamic response and low output temperature coefficient due to numerous built-in auxiliary and compensation functions. A flexible design with different IC product-mix can meet different requirements for AC/DC power supply and effectively simplify peripheral design and reduce cost. 

 

The main product and feature are as follows:

      Primary-side feedback control ICs-SCM1702A provides isolated constant voltage (CV) and constant current (CC) output without using an opto-coupler. It is suitable for USB-compliant adapters and chargers for consumer electronics.

      Secondary-side feedback control ICs-SCM1703A，the controller for isolated flyback power supply designs provides a voltage control using an opto-coupler feedback to improve transient response time to large load steps. The chip integrated loop compensation circuit provides precise high-performance control of output voltage and great output transient response. It is suitable for consumer electronic power supply, industrial equipment power supply and so on.

      Both SCM1702A and SCM1703A are suitable for AC/DC switching power supply of 5W and below. With its internal 650V/700VAC startup switch, the SCM1702A/ SCM1703A can be started in a wide range of input voltage, and being supplied by the transformer auxiliary winding, the chip’s power consumption remains relatively low. 

Current-mode PWM control ICs-SCM1710A is packaged in SOP-8 and suitable for 5-60W AC/DC switching power supply. Its maximum switching frequency can be set by means of external resistor values and EMI behavior is improved by means of flexible drive and frequency jittering technologies. The chip also incorporates a soft start function to improve the start stress and effectively avoiding output overshoot under light-load.

      When under no load (or nearly no load) condition, SCM1710 operates intermittent, thus keeping the converter efficiency over the entire load range high which also results in a reduced standby power consumption

 

      All these three chips are integrated with multiple protection functions, which meet the safety standards.

      For more details, please refer to the datasheet.

 

MORNSUN as one of the most professional dc dc converter suppliers, we provide ac to dc converter 40 amp, precision ac to dc converter, railway dc dc converter and etc. Want to know more? Please contact us.


评论

发表评论

此博客中的热门博文

Current-mode PWM Controller Integrated Circuit SCM1733ASA with 75mW Standby Consumption And 650V Power MOS

图片
  Introduction of   current mode pwm controller  SCM1733ASA   In order to achieve wider application range and lower price requirements, MORNSUN launched a new current-mode PWM controller SCM1733ASA applied to small and medium-power flyback   AC/DC converter    with ultra-low standby consumption of ＜ 75mW, a maximum output power of 20W, built-in high-voltage MOS and better price-performance. It features low starting current and working currently to achieve reliable start-up and achieving low consumptions.   When the AC/DC integrated circuit (IC) is fully loaded, the PWM switching frequency is fixed; after the load is reduced, the green mode is entered, and the switching frequency will step down; during no-load and light load, it will switch the intermittent mode to reduce consumptions. Multiple control modes also can provide soft-start control that reduces MOS stress and frequency jitter control to obtain good EMI. The frequency of intermittent mode is higher than 22KHz without audio no
阅读全文

[New products] Ultra Wide Input Isolated & Regulated DC-DC Converter-UWD240512D-20W

图片
  UWD240512D-20W is a kind of wide input dc dc converter .These products are of 23.5W output power,ultra-wide range of voltageinput of 6-60VDC, isolation voltage of 1500VDC, input over-voltage, under-voltage protection, output short circuit, over-current, andover-voltage protection.   Applications of DC DC Converter UWD240512D-20W Dc DC Converter UWD240512D-20W products are widely used in fields such as industrial control, electric power, instruments;communication, and bus swipe system.   Features of DC DC Converter UWD240512D-20WUltra Wide input voltage range (10:1) High efficiency up to 85% No-load power consumption as low as 0.3W isolation voltage :1.5K VDCOperating temperature range: -40°C to +85C Input under-voltage, over-voltage protection, output short circuit, over-current, over-voltage protection   MORNSUN   is a professional power supply supplier , we provide power supply , ac to dc converter, low cost dc dc converter   and etc. Want to know more? Contact us now.
阅读全文

SOIC-16 package isolated CAN/485 transceiver (R5 Bus IC)

图片
  Based on the IC integration requirement, Mornsun switching power supply factory   launched its SOIC package isolated Bus transceiver products, also called R5 Bus IC, this May.   Advantages:   1 ） Integrated power solution with superior performance R5 bus IC integrates power supply and digital isolation in circuit design to achieve power supply isolation and signal isolation. Take TDA51SCANHC and TDA51S-41HC as examples: only 5V voltage input is requested, and up to 110 nodes of nanosecond CAN bus signal transmission can be easily achieved at 1M frequency.   2 ） High reliability design, withstand voltage up to 5000Vrms R5 bus ICs are designed according to industry standards, taking TDA51SCANHC and TDA51S-41HC as examples, the products meet the requirements of ISO11898-2 standard, meanwhile, based on the requirements of UL1577 standard, the isolation voltage is up to 5000Vrms and CMTI is up to 150kV/us. The product integrates a variety of protections such as short-circuit protection, o
阅读全文