85-305VAC Wide Input Voltage AC/DC Converters LDE02-23Bxx Series

 MORNSUN adds 85-305VAC cost-effective AC/DC converters series LDE02-23Bxx to its LDE series portfolio, which is compatible with the previous LD02-10Bxx series and has higher isolation voltage and better operating temperature range. With this LDE02-23Bxx series come out, the entire LDE series provide powers of 2W, 3W, 5W, 6W, 10W, 15W and 20W.

 

Product advantages are as follows:

1)Better operating temperature, higher isolation voltage

i)High isolation: 4000VAC. It improves product reliability and protects the system effectively.

ii)Wide range operating temperature: the lowest temperature is extended from -25℃ to -40℃  without derating at -25℃; ideal for more various environments.

2)Cost-effective

Material normalization, production automation, higher product consistency and reliability, better performance and price.

3)High reliability and complete protections

These series have a MTBF over 300,000 h and provide protections of output short circuit (OSC), output over-current (OCP), which not only significantly reduce the failure rate of the converter itself but also enhance the safety performance of back-end power modules and the load in abnormal working conditions. 

Product design complies with IEC62368, UL62368 and EN62368 standards (pending). 

 

Applications:

Widely used in the applications of industrial control, grid power, instrumentation, communication and civilian use.

 

Features: 

 

▶ Wide Input voltage Range: 85 - 305VAC/120 - 430VDC

▶ AC and DC dual-use(input from the same terminal) 

▶ High isolation voltage up to 4K VAC 

▶ Operating temperature range: -40℃ to +70℃ 

▶ High power density, high efficiency, environmental friendly 

▶ Output short circuit, over-output current protections 

▶ Meets CISPR32/EN55032 CLASS B 

▶ Meet IEC62368, UL62368, EN62368 standards(Pending) 

▶ PCB mounting, Chassis mounting, Din-Rail mounting available

 

MORNSUN is a professional power supply supplier, we provide ac to dc converter for sale, high voltage ac dc converter and etc. Want to know more? Please contact us.

 


评论

发表评论

此博客中的热门博文

MORNSUN Automotive Compact Size High Isolation Transformer -TSHT5.8-01

图片
  MORNSUN launched a totally new product - automotive compact size high isolation transformer TSHT5.8-01. This new TSHT5.8-01 transformer not only has a high isolation voltage 3000VDC, features compact size and cost effective, but also meets AEC-Q200 standard.   This new transformer can be used with MORNSUN fixed input push-pull controller IC SCM1201  to achieve a 5 VDC input, 5VDC output, 1W rated power isolated DC/DC converter which is usually used to power and isolate the data interface such as RS232, RS485, CAN bus.   Application: Widely used in pure digital circuit, analog acquisition circuit, data exchange circuit.  Typical circuit block diagram as below, Features: > Meets AEC-Q200 standard that required by passive components automotive quality certification > Compact SMD package > Isolation voltage: 3000VDC > Operating temperature range: -40℃ to +125℃   MORNSUN as one of the most professional dc dc converter suppliers , we ...
阅读全文

Current-mode PWM Controller Integrated Circuit SCM1733ASA with 75mW Standby Consumption And 650V Power MOS

图片
  Introduction of   current mode pwm controller  SCM1733ASA   In order to achieve wider application range and lower price requirements, MORNSUN launched a new current-mode PWM controller SCM1733ASA applied to small and medium-power flyback   AC/DC converter    with ultra-low standby consumption of ＜ 75mW, a maximum output power of 20W, built-in high-voltage MOS and better price-performance. It features low starting current and working currently to achieve reliable start-up and achieving low consumptions.   When the AC/DC integrated circuit (IC) is fully loaded, the PWM switching frequency is fixed; after the load is reduced, the green mode is entered, and the switching frequency will step down; during no-load and light load, it will switch the intermittent mode to reduce consumptions. Multiple control modes also can provide soft-start control that reduces MOS stress and frequency jitter control to obtain good EMI. The frequency of intermittent mod...
阅读全文

Isolation or Non-isolation: How to Choose the Right Power Supply?

图片
  An important point to consider when choosing a power module is whether to use an isolated or non-isolated power solution. Before proceeding with the discussion, let us first understand the concept of isolated power supply and the main characteristics of isolated and non-isolated power.   What is the isolated power supply?  The isolated power supply is defined conceptually as the conversion of the voltage through a transformer to realize the isolation between input and output.     Then, what are the isolation features? For example, safety isolation, common-mode noise isolation, ground loop elimination, or for occasions with floating ground requirements, are its key features.   In addition to isolation, voltage conversion is also one of the important characteristics of power supply, including AC to DC, DC to AC, conversion between high and low voltage, and so on. What is more, with some peripheral devices, it can also stabilize the voltage, so as to protect...
阅读全文