Low Voltage Start-up Controller for 4-85V Input Voltage DC/DC Power Supply

 The SCM9603B which has a built-in 85V high voltage transistor works over a wide input voltage range from 4VDC to 85VDC is suitable for wide input voltage DC/DC power supply. When the VDD voltage is less than 8V, the chip begins to charge the VDD pin bypass capacitance. And Large bypass capacitor charge current is up to 20mA when input/output voltage delta is 1V.When the VDD voltage exceeds 10V, the chip stops charging the VDD pin bypass capacitor. At this time, power is supplied by the auxiliary winding and the chip's working current is reduced to 150uA.

 

Moreover, the SCM9603B has built-in over-temperature protection which improves its reliability.

 

Feature:

▶ Wide input voltage range, 4VDC to 85VDC

▶ Small SOT-23 package, benefits a low-cost design

▶ Large bypass capacitor charge current, up to 20mA (input/output voltage delta 1V)

▶ Output charge current >2mA at low input voltage (4V)

▶ Adjustable start-up time set by VDD bypass capacitor

▶ Built-in Over-temperature protection

 

MORNSUN as one of the most professional dc dc converter suppliers, we provide 240vac to 24vdc converter, low voltage dc dc converter, low voltage ac to dc converter and etc. Want to know more? Please contact us.

 


评论

发表评论

此博客中的热门博文

Current-mode PWM Controller Integrated Circuit SCM1733ASA with 75mW Standby Consumption And 650V Power MOS

图片
  Introduction of   current mode pwm controller  SCM1733ASA   In order to achieve wider application range and lower price requirements, MORNSUN launched a new current-mode PWM controller SCM1733ASA applied to small and medium-power flyback   AC/DC converter    with ultra-low standby consumption of ＜ 75mW, a maximum output power of 20W, built-in high-voltage MOS and better price-performance. It features low starting current and working currently to achieve reliable start-up and achieving low consumptions.   When the AC/DC integrated circuit (IC) is fully loaded, the PWM switching frequency is fixed; after the load is reduced, the green mode is entered, and the switching frequency will step down; during no-load and light load, it will switch the intermittent mode to reduce consumptions. Multiple control modes also can provide soft-start control that reduces MOS stress and frequency jitter control to obtain good EMI. The frequency of intermittent mode is higher than 22KHz without audio no
阅读全文

[New products] Ultra Wide Input Isolated & Regulated DC-DC Converter-UWD240512D-20W

图片
  UWD240512D-20W is a kind of wide input dc dc converter .These products are of 23.5W output power,ultra-wide range of voltageinput of 6-60VDC, isolation voltage of 1500VDC, input over-voltage, under-voltage protection, output short circuit, over-current, andover-voltage protection.   Applications of DC DC Converter UWD240512D-20W Dc DC Converter UWD240512D-20W products are widely used in fields such as industrial control, electric power, instruments;communication, and bus swipe system.   Features of DC DC Converter UWD240512D-20WUltra Wide input voltage range (10:1) High efficiency up to 85% No-load power consumption as low as 0.3W isolation voltage :1.5K VDCOperating temperature range: -40°C to +85C Input under-voltage, over-voltage protection, output short circuit, over-current, over-voltage protection   MORNSUN   is a professional power supply supplier , we provide power supply , ac to dc converter, low cost dc dc converter   and etc. Want to know more? Contact us now.
阅读全文

SOIC-16 package isolated CAN/485 transceiver (R5 Bus IC)

图片
  Based on the IC integration requirement, Mornsun switching power supply factory   launched its SOIC package isolated Bus transceiver products, also called R5 Bus IC, this May.   Advantages:   1 ） Integrated power solution with superior performance R5 bus IC integrates power supply and digital isolation in circuit design to achieve power supply isolation and signal isolation. Take TDA51SCANHC and TDA51S-41HC as examples: only 5V voltage input is requested, and up to 110 nodes of nanosecond CAN bus signal transmission can be easily achieved at 1M frequency.   2 ） High reliability design, withstand voltage up to 5000Vrms R5 bus ICs are designed according to industry standards, taking TDA51SCANHC and TDA51S-41HC as examples, the products meet the requirements of ISO11898-2 standard, meanwhile, based on the requirements of UL1577 standard, the isolation voltage is up to 5000Vrms and CMTI is up to 150kV/us. The product integrates a variety of protections such as short-circuit protection, o
阅读全文